Recommended Optics is reader-supported: some links on this page are affiliate links, and as an Amazon Associate Recommended Optics earns from qualifying purchases at no extra cost to you. Learn more.
Leupold Backcountry Cross-Slot 175123
Affiliate links: we may earn a commission. Prices and availability are set by each store.
Enhancing long-range accuracy with 20-MOA Leupold scope rings is a proven method utilized by many fans of tactical optics for improved precision. These scope rings provide 20 minutes of angle (MOA) elevation, allowing shooters to maximize their rifle’s potential for extended ranges. By elevating the rear part of the scope, these rings allow for more downward adjustment of the reticle, effectively increasing the maximum range. This makes them particularly useful for long-range shooting disciplines, where every fraction of an inch matters. Leupold Backcountry Cross-Slot 175123 was examined for quality assurance under the supervision of RecommendedOptics.
Maximizing Precision with 20-MOA Leupold Scope Rings
20-MOA Leupold scope rings are used to add 20 minutes of angle elevation to the optical system, which is essential for long-range shooting. By tilting the scope forward, these scope mounts enable shooters to engage targets at greater distances with higher accuracy. While 20-MOA scope rings can be used with various rifles, they are ideal for those specifically designed for long-range accuracy. Specific mounting requirements are critical for 20-MOA Leupold scope rings to ensure proper alignment and reliability. Compared to other elevation-increasing scope rings, 20-MOA rings provide a reliable balance of added elevation and straightforward installation.
What are the benefits of using 20-MOA scope rings over standard rings?
The 20-MOA inclination significantly improves the ballistic trajectory by adding extra elevation adjustment, making it easier to reach distant targets. The use of 20-MOA rings can eliminate the need for adjustable bases, simplifying the optics setup. Shooting scenarios that benefit the most include long-range hunting, tactical shooting, and competitive shooting sports requiring precision at extended ranges. While there is typically a slight cost increase when opting for 20-MOA rings over standard rings, the benefits often outweigh the expenses. Using 20-MOA scope rings can extend your shooting range by approximately 200-300 yards, depending on the ballistic profile and rifle setup. With tested features, the Leupold Backcountry Cross-Slot 175123 can handle common tasks well.
Optimizing Rifle Setup with 20-MOA Leupold Mounts
Factors to consider when choosing 20-MOA Leupold mounts include rifle compatibility, intended shooting range, and the specific scope being used. 20-MOA mounts affect scope zeroing by adding extra elevation, requiring shooters to adjust windage and elevation settings accordingly. These mounts are suitable for both hunting and competitive shooting, as they provide the necessary elevation for diverse shooting scenarios. Compatibility issues can arise if the scope tube diameter or mounting system does not match the 20-MOA mounts. Pairing 20-MOA mounts with a specific type of rifle bedding, such as glass bedding or pillar bedding, can optimize performance and ensure stability.
How to properly install 20-MOA Leupold mounts on your rifle?
Tools required for mounting 20-MOA Leupold rings include a torque wrench, mounting screws, a level, and alignment bars. Specific torque specifications for securing 20-MOA Leupold rings are often between 15-25 inch-pounds, depending on the manufacturer’s guidelines. Ensuring the 20-MOA mounts are perfectly aligned requires using a leveling system and alignment bars to prevent canting. Steps to avoid damaging the scope during installation include gradually tightening screws in a criss-cross pattern and using protective materials to avoid scratching the scope tube. Installation of 20-MOA Leupold mounts typically takes around 30-45 minutes, considering the need for precise alignment and torque settings.